Exact: 1 in = 25.4 mm

Inches to MM Converter

To convert inches to millimeters, multiply the length in inches by 25.4, because one inch is exactly 25.4 mm. The converter below accepts decimals, fractions such as 3/8 and feet plus inches, and returns millimeters and meters plus millimeters with the steps shown.

Updated

in
Swap
Millimeters

25.4mm

Meters + mm 0 m 25.4 mm
Try an example
Live ruler Drag the marker or use the arrow keys
mmin0510152025303540455001/41/23/411 1/41 1/21 3/421 in = 25.4 mm
Centimeters
2.54 cm
Calculation steps
1 in × 25.4 mm/in = 25.4 mm

Closest metric sizes

Nearest 0.1 mm25.4 mm0 mm
Nearest 0.5 mm25.5 mm+0.1 mm
Nearest 1 mm25 mm−0.4 mm

Same length, other units

Centimeters
2.54 cm
Meters
0.0254 m
Feet
0.08333 ft
Yards
0.02778 yd
Thou (mil)
1000 thou
Points (pt)
72 pt
Micrometers
25400 µm

Quick reference

1/16 in
1.5875 mm
1/8 in
3.175 mm
1/4 in
6.35 mm
1/2 in
12.7 mm
1 in
25.4 mm
1 ft
304.8 mm

How to Convert Inches to Millimeters?

To convert inches to millimeters, multiply the inch value by 25.4.

d(mm) = d(″) × 25.4

One inch is equal to 25.4 millimeters:

1″ = 25.4 mm

The distance d in millimeters is the distance d in inches multiplied by 25.4:

Example #1

Convert 5 inches to millimeters.

5 in = 5 in × 25.4 mm/in = 127 mm

Example #2

Convert 20 inches to millimeters.

20 in = 20 in × 25.4 mm/in = 508 mm

Because 25.4 is a definition rather than a rounded figure, this direction is exact. Multiplying by 25.4 adds at most one decimal place to your input and loses nothing.

How Many Millimeters Are in an Inch?

25.4mm

One inch is equal to 25.4 millimeters:

1 in = 25.4 mm/in × 1 in = 25.4 mm

How Many Inches Are in a Millimeter?

0.03937in

One millimeter is equal to 0.03937 inches:

1 mm = 1 mm / 25.4 mm/in = 0.03937 in

What Is 10 Inches in Millimeters?

254mm

10 inches is exactly 254 millimeters.

Multiply 10 inches by 25.4 to get millimeters:

10 in = 25.4 mm/in × 10 in = 254 mm

Inches to MM Conversion Chart

Every value in this table is exact. Fractions of an inch convert to millimeters with no rounding at all, because the denominators are powers of two and 25.4 has a single decimal place.

Inches to MM Conversion Chart
Inches (″)Millimeters (mm)
0.01 ″0.254 mm
1/64 ″0.396875 mm
1/32 ″0.79375 mm
1/16 ″1.5875 mm
0.1 ″2.54 mm
1/8 ″3.175 mm
3/16 ″4.7625 mm
1/4 ″6.35 mm
5/16 ″7.9375 mm
3/8 ″9.525 mm
7/16 ″11.1125 mm
1/2 ″12.7 mm
5/8 ″15.875 mm
3/4 ″19.05 mm
7/8 ″22.225 mm
1 ″25.4 mm
2 ″50.8 mm
3 ″76.2 mm
4 ″101.6 mm
Inches to MM Conversion Chart (5–100 ″)
Inches (″)Millimeters (mm)
5 ″127.0 mm
6 ″152.4 mm
7 ″177.8 mm
8 ″203.2 mm
9 ″228.6 mm
10 ″254.0 mm
12 ″304.8 mm
20 ″508.0 mm
24 ″609.6 mm
30 ″762.0 mm
36 ″914.4 mm
40 ″1016.0 mm
50 ″1270.0 mm
60 ″1524.0 mm
70 ″1778.0 mm
80 ″2032.0 mm
90 ″2286.0 mm
100 ″2540.0 mm

How to Convert Fractional Inches to Millimeters?

Divide the top number by the bottom number to get a decimal, then multiply by 25.4.

Fractions are how inch measurements are actually written, so this is the common case rather than the exception. The calculator accepts them directly and the method by hand is two steps.

  • For 3/8 inch: 3 / 8 = 0.375 and 0.375 × 25.4 = 9.525 mm.
  • For 5/16 inch: 5 / 16 = 0.3125 and 0.3125 × 25.4 = 7.9375 mm.

For a mixed number such as 2 1/4 inch, convert the fraction and add it to the whole number. 1 / 4 = 0.25, giving 2.25 inches, which is 57.15 mm.

A shortcut worth memorizing: 1/16 inch is 1.5875 mm, so every sixteenth adds a little over one and a half millimeters. That gets you close enough to sanity check any result in your head.

mmin02468101214161820222401/81/43/81/25/83/47/815/16 in = 7.9375 mm
1/16 in = 1.5875 mm · 1/8 in = 3.175 mm · 1/4 in = 6.35 mm

How to Convert Feet and Inches to Millimeters?

Multiply the feet by 12, add the loose inches, then multiply the total by 25.4.

(ft × 12 + in) × 25.4 = mm

Heights, room dimensions and timber lengths usually arrive as feet and inches together and this is where the arithmetic goes wrong.

For 5 feet 9 inches: 5 × 12 = 60, plus 9 is 69 inches and 69 × 25.4 = 1752.6 mm.

The common mistake is treating the inches as a decimal part of the foot. Five feet nine inches is not 5.9 feet, it is 5.75 feet, because nine inches is three quarters of a foot. Collapsing everything to total inches first removes the problem.

How to Convert Feet and Inches to Millimeters?
Feet and inchesTotal inchesMillimeters
1 ft 12 in 304.8 mm
2 ft 6 in 30 in 762.0 mm
4 ft 48 in 1219.2 mm
5 ft 60 in 1524.0 mm
5 ft 6 in 66 in 1676.4 mm
5 ft 9 in 69 in 1752.6 mm
6 ft 72 in 1828.8 mm
6 ft 2 in 74 in 1879.6 mm

What Is an Inch?

An inch (in or ″) is a unit of length in the US customary and imperial systems.

  • One inch is 1/12 of a foot (ft).
  • One inch is 1/36 of a yard (yd).
  • One inch is exactly 25.4 millimeters (mm).

The inch is normally divided in halves rather than tenths, which is why tape measures, drill bits and wrench sets are marked 1/2, 1/4, 1/8, 1/16, 1/32 and 1/64.

What Is a Millimeter?

A millimeter (mm) is a unit of length in the metric system.

  • One millimeter is 1/1000 of a meter (m).
  • One millimeter is 1/10 of a centimeter (cm).
  • One millimeter is 1/25.4 of an inch (in).
1959

Why Is One Inch Exactly 25.4 Millimeters?

One inch is exactly 25.4 mm because the International Yard and Pound Agreement of 1959 defined the yard as exactly 0.9144 meters, and an inch is 1/36 of that yard.

The figure was negotiated, not measured and the history explains why it is exact.

  1. 1893

    Before 1959 the inch was not the same length in every country. The United Kingdom and the United States used slightly different definitions. The gap was invisible in daily life and large enough to wreck precision manufacturing between the two. The American inch worked out at roughly 25.400051 mm, because the United States had defined the meter as 39.37 inches under the Mendenhall Order of 1893.

  2. 1930

    Industry moved before governments did. The British Standards Institution adopted an inch of exactly 25.4 mm in 1930 and the American Standards Association followed in 1933 and by 1935 industry in sixteen countries had taken up what became known as the industrial inch.

  3. 1959

    The formal settlement came later. In 1946 the Commonwealth Science Congress recommended a yard of exactly 0.9144 meters and on 1 July 1959 the United States, the United Kingdom, Canada, Australia, New Zealand and South Africa signed a treaty adopting the same standards. Defining the international yard as exactly 0.9144 meters fixed the foot at exactly 0.3048 meters and the inch at exactly 25.4 mm.

  4. SI

    One consequence is worth appreciating. The meter is defined from the speed of light and the inch is now defined from the meter, so the inch is ultimately defined by a physical constant rather than by any physical object.

What Was the US Survey Foot?

The US survey foot was a slightly longer foot of 1200/3937 meters used in American land surveying until NIST retired it on 1 January 2023.

There used to be a second American foot and anyone working with older land records can still run into it.

The US survey foot was defined as 1200/3937 of a meter, making it about two parts per million longer than the international foot. That is roughly 0.01 foot per mile or about three millimeters across that distance. Invisible in ordinary work and significant in surveying, where coordinate values run into millions of feet.

That ambiguity is now closed. NIST deemed the US survey foot obsolete at midnight on 1 January 2023, superseded by the international foot of exactly 0.3048 meters and it is now to be avoided except for historic and legacy applications.

For this converter it means one thing: there is only one answer. An inch is 25.4 mm, everywhere, for every purpose. The only place it still matters is legacy surveying data created before 2023, where mixing the two definitions in the same dataset remains a genuine hazard.

When Do You Need to Convert Inches to MM?

You need to convert inches to millimeters when imperial drawings, fasteners, timber, paper or reference dimensions meet metric parts and tools.

  • Ordering metric parts against imperial drawings

    The drawing says 3/8 inch, the supplier catalog lists 9.525 mm and you need to confirm they are the same thing before ordering a thousand of them.

  • Hardware and fasteners

    A 1/2 inch bolt head is 12.7 mm. A 13 mm socket is 0.3 mm loose on it and will round the corners.

  • Timber and sheet goods

    A nominal 2x4 measures 1.5 by 3.5 inches, which is 38.1 by 88.9 mm. Sheet thickness quoted in fractions converts the same way.

  • Paper sizes

    US Letter is 8.5 by 11 inches, which is 215.9 by 279.4 mm. A4 is 210 by 297 mm, so the two are not interchangeable.

  • Jewelry and watchmaking

    Both industries work in millimeters while some legacy specifications remain in fractions of an inch.

  • 3D printing and CAD

    Models are usually authored in millimeters while imported reference dimensions often arrive in inches.

Frequently Asked Questions

How many mm are in an inch?

Exactly 25.4 millimeters. It is a definition rather than a measurement, so it carries no rounding and no uncertainty.

How do I convert inches to mm?

Multiply the inch value by 25.4. For example, 7 × 25.4 = 177.8 mm.

What is 1/2 inch in mm?

12.7 mm exactly, which is half of 25.4.

What is 3/8 inch in mm?

9.525 mm. Divide 3 by 8 to get 0.375, then multiply by 25.4.

What is 1/16 inch in mm?

1.5875 mm. Each sixteenth of an inch is a little over one and a half millimeters.

What is 12 inches in mm?

304.8 mm, which is also exactly one foot.

How do I convert feet and inches to mm?

Multiply the feet by 12, add the loose inches, then multiply by 25.4. Five feet nine inches is 69 inches, which is 1752.6 mm.

Is 5 feet 9 inches the same as 5.9 feet?

No. Nine inches is three quarters of a foot, so it is 5.75 feet. Working in total inches avoids the error entirely.

Is the answer exact or rounded?

Exact. Because 25.4 is the definition rather than an approximation, multiplying by it introduces no error at all.

How many mm in 6 inches?

152.4 mm.

What is 0.01 inch in mm?

0.254 mm. This is also ten thou, a common unit in machining.

What is a thou in mm?

One thou is 0.001 inch, which is 0.0254 mm. Machinists use it as their standard unit of precision.

Why is an inch defined as a metric value?

Because the countries using the inch agreed to define it from the meter in the International Yard and Pound Agreement of 1959, ending small national differences that were disrupting precision manufacturing.

Do the UK and the US use the same inch?

Yes, since 1959. Both adopted the same definition in the same agreement.

What was the US survey foot?

A slightly longer variant of the foot, about two parts per million larger, used in American surveying. NIST declared it obsolete on 1 January 2023, so it now applies only to historic and legacy records.

Can I convert back to check my answer?

Yes. Divide the millimeter result by 25.4 and you should get your original inch value back exactly, because the factor is exact in both directions.